Assign a Fulfillment Printer for a SkyTab KDS Station

Description: Learn how to assign a fulfillment printer for a SkyTab KDS station.

Note: This procedure assumes you have already added the printer to your Shift4 network. If this is not the case, you need to contact your IT department or a technician to install the printer on the network before continuing.

---

Note: For this configuration, you need to have a Fulfillment Printer configured on your SkyTab POS.

Note: You need manager permissions to complete this procedure.

1. On your POS station, navigate to Manager > Settings > Hardware, then tap on the Printers tab.
   
2. From your printer list, select the KDS station that you use to complete an order. This is typically an expo station.
   
3. Tap on the Fulfillment Printers tab.
4. Press the + field next to an Order Type, then select the printer or printers for orders coming from the KDS station.
   
5. Press OK when you're finished.
6. On the Fulfillment Printers screen, you should now see your assigned printer.
   
7. Tap Save to save your changes.