SkyTab Kiosk Installation Guide

Description: Learn about the SkyTab Kiosk installation process for SkyTab POS.

---

Note: After connecting the SkyTab Kiosk, configure it in Lighthouse Business Manager to ensure it is set up correctly for use.

Jump to a section by selecting a link below:

• SkyTab Kiosk Physical Installation (LAN Setup)
• SkyTab Kiosk Physical Installation (Wi-Fi Setup)

SkyTab Kiosk Physical Installation (LAN Setup)

To install SkyTab Kiosk, proceed with the following steps:

1. Plug the TP-Link router's power cable into the power port on the back of the router and the other end into a wall outlet.
   
2. Connect the TP-Link router to your modem/router by plugging one of the provided Ethernet cables into Port 1 on the TP-Link router and the other end into a LAN port on your modem/router.
   
3. Turn the SkyTab Kiosk over to see the bottom of the base. There are two USB-C ports. Plug the SkyTab Kiosk USB Hub into one of the USB-C ports.
   
4. One of the provided Ethernet cables should be plugged into one of the USB Hub's LAN ports, and the other end should be plugged into Port 2 of the TP-Link router.
   
5. Plug the SkyTab Kiosk power cable into the USB Hub's DC IN port, and the other end into a wall outlet.
   
6. Turn on the SkyTab Kiosk terminal by selecting the power button (located at the top of the screen).
   

1.  

SkyTab Kiosk Physical Installation (Wi-Fi Setup)

1. Power the L1400 Hub using the supplied AC adapter.
2. Connect the fixed USB-C cable from the Hub to a USB-C port on the bottom of the L1400 pedestal stand.