Set up the Kitchen Display System on SkyTab POS

Description: Learn how to add your KDS (Kitchen Display System) on the SkyTab POS and configure the settings.

---

To watch more how-to videos, visit our video section.

Note: Before you begin, make sure your KDS is plugged into the same network that all your equipment is on.

1. Log into your SkyTab POS as a manager and navigate to Manager > Settings > Hardware > Printers/KDS.
2. Select Add New Device.
   
3. Enter a name for your SkyTab KDS display.
   Note: The name of your KDS should reflect usage, such as "Prep Station."
   
4. In the IP field, select IP and enter the IP address. To find the IP address of your KDS:
   1. Turn on your KDS.
   2. Check the lower right corner of the screen for the IP address.
      
   3. Enter this number in the IP field.
5. Select SkyTab KDS from the Device Model dropdown.
   Note: When SkyTab KDS is selected, the other values on the screen will be set by default.
6. Tap Save.
7. Tap the Send Config button.
   
8. Once sent, assign the items and modifiers you want the KDS to show.
9. Tap Save.
10. Go to the Order menu and create a test ticket to send to the KDS and ensure everything is working properly.
     
11. Repeat these steps for each KDS.