Use the Verifone P630-A With Commerce Engine

Description: Manage everyday operations on your Verifone P630-A running Commerce Engine, including power, connectivity, and device information.

---

The Verifone P630-A runs Commerce Engine as its payment application. Use this guide to manage day-to-day device operations.

Power On, Off, or Reboot the Device

The P630-A does not have a traditional power cycle. The power button is disabled during normal operation to prevent accidental shutdowns.

• Power on: Connect the power supply. The device starts automatically.
• Power off or reboot: Unplug the power supply from the Ethernet dongle, then reconnect it.

Check the Commerce Engine Version

1. On the black Shift4 idle screen, tap five times in the upper-right corner. A menu slides open on the left side.
2. The Commerce Engine version is displayed in the menu.

Run a Connectivity Check

1. On the black Shift4 idle screen, tap five times in the upper-right corner.
2. Tap Run Connectivity Test.
3. Tap Run Connectivity Test again to start.
4. Review the results. All endpoints should show as reachable.

Note: Device Cloud will show as unreachable by default. This is expected unless your integration specifically requires it. If the Shift4 Gateway shows as unreachable, visit the Device is Offline article.

Locate the Serial Number

The serial number is printed on a label on the back of the device. If the device is mounted to a stand and the label is not accessible, contact Shift4 Support for help locating it in the device's system settings.

Network Requirements

The P630-A requires internet access to communicate with the Shift4 platform. For the full list of addresses, ports, and firewall rules, visit the Commerce Engine Network Requirements article.