Add a Glass Device to SkyTab POS WiFi Network

Description: Learn how to add your Glass device to the SkyTab POS WiFi network.

---

Important: You need your WiFi passcode for this procedure. This information is on your WiFi Info Card provided with your Shift4 router during installation. If your network was configured by a third party or internal IT department, you will need to contact them to provide you with the passcode.

1. Power on your SkyTab Glass device and install it in the provided R15 case.

2. From the SkyTab Login page, swipe up to expose the Android menu and tap on the overflow menu (three dots) on the left.
   

3. Tap on the Settings button.
   

4. In Android Settings, select Network & Internet.
   

5. Choose the S4Device5G network.
   

6. Input the passcode from the WiFi Info Card provided with your router on the initial installation.
   Note: If you do not have your passcode, contact SkyTab Support by calling 888.276.2108 or via live chat at shift4.com/support.
   
   If your network was provided by a third party or internal IT team, it will likely have a different name. They will need to provide the network name and passcode.