Epson TM-m30 Printer Self Test

Description: To perform a self-test on the Epson TM-m30 Thermal Printer, follow the steps outlined in the article below. Make sure that the printer paper cover is closed before beginning. 

---

1. Turn off the printer. 
2. While pressing the Feed button, turn on the printer.
   • Hold down the Feed button until printing starts.
3. Release Feed when the red paper button flashes (about 6-7 seconds).
4. Briefly press the Feed button (less than one second) to continue the self-test.
5. The printer prints using the built-in character set.
6. After “*** completed ***” is printed, the printer is reset and switches to standard mode.
7. If no report prints, then retry these steps.

Important: Avoid letting go of the Feed button too soon after power-cycling. Repeat the steps above until you are able to get one to print successfully.