Remote Printer Setup for Echo

Description: Review the steps necessary to properly install the Epson TM-M30 Thermal Printer as a remote printer below. 

1. Physical Installation
2. Connecting to the Echo
3. Additional Options

---

Physical Installation

To begin the installation, place the printer at its permanent location to avoid having to move it again once it’s set up. 

• Connect the Ethernet cable from the remote printer to a port on the TP-Link Router.
  • The terminal itself must also be plugged into the same TP-Link Router for them to communicate.
• Connect the power supply to the remote printer by first connecting the printer to the power supply and then the power cable to an electrical socket.
  • The power indicator will be lit on the front of the printer when it has power.
  • Make sure you have put paper into the printer
• Power on the remote printer using the power button on the front

Connecting to the Echo

Once the printer is installed properly, navigate to Manager > Settings > Hardware Settings > Remote Printer Setup.

Tap the blue Scan Network button near the top to search for the remote printer. Look for an IP Address to populate into the box. It may take a moment to populate. Then press Save.

Additional Options

• Cut Receipt: if you want each receipt to be cut at the end of the order, toggle Cut Receipt to Yes.
• Text Size: offers sizes between Normal, Wide, and Large
• Line Spacing: to change the space between lines of text on the receipt, choose a different Line Spacing option such as Single, 1.5x, and Double.
• Print Void Slips: you can also choose whether or not this printer will receive a slip to notify the recipient that an order has been voided
• Test Print: allows you to print a test slip to look at the changes you made before committing to them